background image

 

39

GETTING TO KNOW THE TRACTOR 

E134 E135 E136

LIGHTS SWITCHER (a) 

a -   Lighting off. 
b -   Marker and tail and registration plate 

lights and illumination of instruments 
on. 

c -  All consumers on as in position “b“. 

In addition to this, also low or high 
beams are on (according to position 
of the direction indicators, head-
lamps and flash lights switch). 

 
 
 
 
 
 
 
 

SWITCH FOR SWITCHING OVER 
LIGHTS IN THE MASK AND ON THE 
ROOF (b) 

a -   Lights on the roof off. 
b -   Lights on the roof on. 
The switch controls lights in the mask or 
on the roof of the cabin. Use the lights on 
the roof of the cabin only if some imple-
ments, covering the headlamps in the 
mask, are installed in the front three-
point suspension. Lighting headlamps on 
the roof of the cabin are indicated by the 
illuminated symbol on the switch. 
The high beams may only light in the 
front mask of the tractor. 
 
 
 

SWITCH OF WARNING LIGHTS (e) 

a -   Warning lights off. 
b -   Warning lights on. 
Function of warning lights is indicated by 
a flashing indicator on the dashboard. 
 
 
 
 
 
 
 
 
 
 
 
 
 

 

 

 

Содержание Proxima Plus 105






































































































































































































Отзывы: