Zetor MAJOR CL Скачать руководство пользователя страница 111

Страница: 111 / 134

Checking the oil in gear box, final drive housing and rear axle

Replacement of the transmission oil cleaner element with hydraulic pump suction filter

MHS16N043

The oil filter is located on the left side of the gearbox.

Prior to the replacement of the filter element put a suitable vessel for catching the dripping oil

under the tractor.

1. Unscrew the oil filter body (1)

2. Replace the filter element

3. Perform the reassembly of the oil filter body

Note:

Prior to reassembly of the filter body lubricate the sealing o-ring with lubricating oil.

Replacement of the filter of the hydraulics suction

Gear system has a common oil filling. The state of oil is
checked with a dipstick (a), which is placed in the rear part

of final drive housing. Dipstick hole serves as filling.

Do the inspection with a tractor at standstill. Oil

must be in the range (A) of dipstick.

NM13N066

The suction cleaner is located on the left side of the tractor

behind the fuel tank. Replacement of the filter must be

performed when the gearbox filling is drained.

Prior to the replacement of the filter element put

a suitable vessel for catching the dripping oil under

the tractor.

1. Unscrew the sleeve (1) and water tapes (2)

2. Disassemble the filter element

3. Perform assembly of a new filter element

MHS16N042

MAINTENANCE INSTRUCTIONS

110

Содержание MAJOR CL







































































































































Результаты поиска

Содержание MAJOR CL

Отзывы:

Zetor MAJOR CL, Руководство оператора, Страница: 111 / 134

Результаты поиска

Содержание MAJOR CL

Отзывы: