Zetor COMPAX CL 35 NC Скачать руководство пользователя страница 52 | Manualshive

Страница: 52 / 114

Zetor COMPAX CL 35 NC Скачать руководство пользователя страница 52

Reverse Shift Lever

This control allows you to change the direction of travel from front to reverse and from reverse to front. When
not in motion, move the lever to the 'N' position for neutral.



Push the lever away from the driver to drive forward.



Pull the lever towards the driver to reverse.

Depress the clutch pedal fully before moving the reverse shift lever.

When changing the direction from front to reverse or reverse to front, make sure that the tractor is

stopped before changing the direction. Failure to do so may result in damage to the machine or

serious injury.

Warning:



Only use the reverse shift lever when sitting in the tractor.



Do not use the reverse lever to start the tractor when towing or driving uphill, use the

clutch instead.



Always stop before getting off the tractor.

Parking Brake Lever

If the parking brake is applied during the starting off, it is signaled by an audible warning

signal.
If the parking brake is applied during driving, the brakes will be damaged.

1. Reverse Shift Lever

HODP061

1. Lift the lever up to apply the parking brake.
2. Press the button at the end of the parking brake lever
and lower the lever to disengage the parking brake.

CCL3540018

TRACTOR CONTROLS

51

«
...
50
51
52
53
54
...
»

Содержание COMPAX CL 35 NC



















































































































Отзывы:

Нет отзывов