ZETLab ZET 7152-N-VER.3, Руководство пользователя, Страница: 32 / 38

LLC "ETMS"
Tel./Fax.: +7 (495) 739-39-19, www.zetlab.com
32
Sequence of copying the registered signals from ZET 7152-N-VER.3 to PC is as follows: 1)
Start ZETLAB Software, 2) Connect USB cable to “ ” port of ZET 7152-N-VER.3 and a free
USB-port of the PC. 3) The program for files saving and conversion ( Figure 3.3 ) will start
automatically.
Figure 3.3 Window of program “Select files to convert”
4) Select the necessary time span and activate “Apply” key. It will start the process of files
saving and conversion into the file directories for storing signals and compressed signals data
( Figure 3.2 ).
5) Upon completion of files copying and conversion, you will see a window offering you to
start “View historical events” program (see ZETLAB Software. Operator’s Manual).
Note: In the case if “Cancel” key of “Select files to convert” window is enabled ( Figure
3.3 ), the corresponding window will be closed. The next start of the program for files copying and
conversion can be initiated by means or re-connecting the USB-cable.
Attention! Early interruption of copying and conversion process may lead to necessity of
ZET 7152-N-VER.3 reloading.