INFINITY ID2 INSTALLATION MANUAL.
Software Versions: PANEL 1.N & LOOP O.N
Approved Document No: GLT-211-7-1
Issue 1.9 Author: MG/NJ Date: 06/04/2016
PAGE 22
10. FIELD DEVICE TERMINATION
10.1 Terminating the wiring
Figure 6: Cable connections
All cables entering the enclosure should have cable glands, which will prevent unwanted openings in
the enclosure.
The Zone circuits should be connected to the appropriate connector block on the Termination PCB.
All cable screens should be terminated at the brass earthing strip as shown in Figure 6
