background image

6

single room serving as both sitting and 

bedroom) then the apparatus should be 

put as far from the cooking appliances 

as possible but near to where the person 

sleeps.

• If the appliance is in a room not normally 

used (for example a boiler room), the 

apparatus should be put just outside the 

room so that the alarm may be heard more 

easily. Alternatively, a remote alarm siren 

may be connected to a type A apparatus 

located in a room(s) containing a fuel-

burning appliance.

Where in the room should I place the 

detector?

Apparatus  located  in  the  same  room  as  a 

fuel-burning appliance:

For both wall and ceiling mounted apparatus 

the following applies:

a

 The apparatus should be at a horizontal 

distance of between 1m and 3m from the 

potential source.

b

 If there is a partition in a room, the 

apparatus should be located on the same 

side of the partition as the potential source.

c

 Carbon Monoxide detectors in rooms with 

sloped ceilings should be located at the 

high side of the room.

In  addition  to  the  above  the  following  must 

be observed:

If the apparatus is located on a wall:

a

 it should be located close to the ceiling;

b

 it should be located at a height greater 

than the height of any door or window;

c

 it should be at least 150mm from the 

ceiling.

If the apparatus is located on the ceiling:

a

 it should be at least 300mm from any 

wall and any ceiling obstruction e.g. light 

fittings.

Apparatus  located  in  sleeping  rooms 

and  in  rooms  remote  from  a  fuel  burning 

appliance:

Apparatus  located  in  sleeping  rooms  or 

located in rooms remote from the fuel-burning 

appliance should be located relatively close 

to the breathing zone of the occupants

Where not to put the detector

The apparatus should not be installed:
• In an enclosed space (for example in a 

cupboard or behind a curtain).

• Where it can be obstructed (for example 

by furniture).

• Directly above a sink
• Next to a door or window
• Next to an extractor fan
• Next to an air vent or other similar 

ventilation openings

• In an area where the temperature may 

drop below -10°C or exceed 40°C

Содержание ZD-CO-9X























Отзывы: