Document No: GLT-203-7-1
Issue No: 1.8
Author: NRP Jones
Date: 15/02/2017
Page 3
FYREYE II SANDWICH SOUNDER - INSTALLATION MANUAL
Technical Data
Model
MKII-SSB
Part Number
80-224
Operating Voltage
17 – 28V DC
Quiescent Current
650µA
Alarm Current
5.5mA
Sound Output
Aprox 85 dB (Depending on tone – See Table)
Min 75dB
Minimum Operating Temperature 0°C
Operating Temperature
-10°C to +55°C
Max Humidity
95% RH Non Condensing
Ip Rating
IP 21C
Size
100mm dia x 40mm (Without Detector)
Weight
160g
For further information, including directional A-weighted sound output information
please see doc MKII-SSB-OD, available from the manufacturer
Troubleshooting
Symptom
Probable Cause
Device Not Seen By Panel
This is normal. This is a platform sounder and does not
reply to the panel.
Detector Fitted To Base
Not Seen
Check that a Fyreye II detector is used. Previous versions of
detector will not work on a Fyreye II loop.
Check that the wiring to the common base is correct (+ve =
L2, -ve = L1 IN)
Sounder Is Not Operating
Check if Platform sounder has been disabled for the
address of the detector fitted.
Check that the wiring to the common base is correct (+ve =
L2, -ve = L1 IN)
Check Panel`s actions (Cause & Effect) programming is
correct.
Can Not Start An
Individual Sounder
Check whether triggering individual sounders is supported
by the control panel.
Check the Cause & Effect programming to see if common
sounder operation has been selected.
