Document No: GLT-235-7-1
Issue No: 010
Author: NRP Jones
Date: 10/05/2021
Page 1
FYREYE MKII ADDRESSABLE ZONE MONITOR MODULE WITH ISOLATOR - INSTALLATION GUIDE
FYREYE MKII ADDRESSABLE ZONE MONITOR MODULE WITH ISOLATOR
INSTALLATION GUIDE
General
The Fyreye MkII Addressable Zone Monitor Module is supplied with a backbox for surface
mounting.
NOTE: The Zone Monitor Module is designed for indoor use only.
This product is loop powered. A loop load claulation must be performed to determine the
permissable quantity of ZAZM-MI per loop.
Model No: ZAZM-MI
Fyreye MkII Addressable Zone Monitor Module With Isolator
Surface Mounting
1. Mount the backbox as required and install all cables for termination.
2. Set the address of the unit as shown on page 3.
3. Terminate all cables.
4. Gently push the completed assembly towards the back box until the mounting
holes are aligned and secure with the two mounting screws provided. DO NOT
OVERTIGHTEN.
Isolator Module
The Zone Monitor Module is fitted with a bi-directional short-circuit isolator and will be
unaffected by loop short-circuits on either loop input or output.
