Zesto Audio 2015 7 |
P a g e
Specifications
5 Inputs
3 sets of Single Ended inputs with an impedance of 100K Ohms
2 sets of true Balanced transformer inputs (pin 2 hot) with an impedance of 10K Ohms
Maximum peak input level of 5 Volts RMS
4 O
Headphone
1/4 TRS inch stereo headphone jack
4 Line outputs
2 sets of true Balanced transformer outputs (pin 2 hot) with an impedance 150 Ohms
2 sets of Single Ended outputs with an impedance 150 Ohms
Maximum peak output level of 10Volts RMS +20dB
Independent ground lift switches on the left and right Single Ended outputs
1 set of Single Ended Cinema bypass outputs from input #1
Headphones
Built in ~ 1 Watt class A-B headphone amp.
2 Volts headphone output.
Frequency response 20Hz to 50KHz
Total Harmonic Distortion ~ .02%
Power
Power consumption 27W, 0 drain when off
Voltage 110/120V AC 60Hz
Optional factory installed 220V or 230/240V AC 50/60Hz
Standard 3 pin IEC power connector
ON/OFF power switch conveniently located on the side panel
Two internal high quality linear regulated power supplies, 250V and 12V
Other Features
Each unit is hand made in the USA
50 hour factory burn in on all circuits and vacuum tubes
Dimensions 17” W X 12” D X 5” H
Weight 23 lbs.
16 gauge zinc plated steel enclosure
