23
7. s
Pecial
Functions
By pressing
button it is possible to select one of the following 3 special functions:
RESET function
By activating this function all the settings are restored to the initial facto
-
ry value. The comfort temperature is set to 19.0 ° C, the preset program
is the one described in the appropriate section and the open window
detection function is deactivated.
5"
To RESET press the
button for at least 5 seconds.
The convector is automatically set in Comfort mode.
OPEN WINDOW DETECTION function
This function allows to identify the opening of a window and to automa
-
tically set the Antifreeze operation mode.
If a sharp reduction of the ambient temperature is detected during the
normal operation of the product, the antifreeze mode is automatically
activated to reduce energy wastes. The window symbol and the anti-
freeze symbol flash to indicate that the function is activated.
The restoration of normal operation is not automatic but is obtained by
pressing any of the 5 buttons of the product.
The correct functioning of this function may depend on the po
-
sitioning of the product in the room, the presence of drafts, the
external temperature and the window opening time.
Activate the function by pressing the
button.
The window symbol lights up on the display.
Deactivate the function by pressing the
button.
The window symbol turns off on the display.
