www.zestoutdoorliving.co.uk | 01352 752555 option 1 | [email protected]
Set out Lower Leg (front) (B1), Upper Leg (front) (E1) and Leg (back) (C1) as shown (left) (large
holes face down) and place Horizontal Long Brace (A) and Horizontal Short Brace (D) in
position shown (Above left) Align bolt holes and insert 8 x 100mm Bolts. (Nuts & washers to
be attached at a later stage).
Note: horizontal short brace D has offset central hole which should be positioned closest to
rear leg C1.
Position Trellis Panel (F) between horizontal bracings and attach to Lower Leg (front) (B1) and
Leg (back) (C1) using 4 x 60mm screws.
Repeat procedure for remaining Lower Leg (front) (B2), Leg Back (C2), Upper Leg front (E2),
Horizontal Long Brace (A), Horizontal Short Brace (D) and Trellis Panel (F) to form right hand
side of swing.
1
Ensuring large drilled holes are facing up, attach Swing Beam (G) to Back Leg (C1) using 1 x
100mm Bolt, Nut & Washer. Do not fully tighten at this stage.
2
1a
2a
1b