Zest 4 Leisure Veg Bed 2m, Инструкция по сборке

Страница: 3 / 5

Please take a few moments to check all pack contents listed.
Assembly requires 2 persons.
Tools required: Adjustable Spanner, Corded/Cordless Drill, Pozi-drive
Bit/Screwdriver, 3mm Drill Bit required in order for you to drill all screw holes
before construction.
Veg Bed 2m is now complete.
1. Fix End Panels A to Base Board B using 4no 60mm Screws
– 2no per End Panel A
(Figs.1a & 1b)
2. Position Side Panel C between End Panels A (Fig.2a) and attach using 8no 60mm
Screws
– 4no through each End Panel A – Fig.2b.
Repeat procedure for remaining Side Panel C.
3. Position Side Board D between End Panels A , on top of Side Panel C (Fig.3a) and
attach using 6no 60mm Screws
– 2no through each End Panel A (Fig.3b) and 2no
through Side Panel C (Fig.3c).
Repeat procedure for remaining Side Board D.
4. Interlock 2no Legs E and fix together using 1no 65mm Bolt, Washer & Nut (Fig.4a).
Repeat procedure for remaining Legs E.
Position 2no legs assembly 12cm nom. from End Panels A and 1no leg assembly
centrally (Figs.4b & 4c) and fix through Side Panels C using 18no 60mm Screws
–
3no per Leg E (Figs 4d & 4e).