Please take a few moments to check all pack contents listed.
Assembly requires 2 persons.
Tools required: Corded/Cordless Drill, Pozi-drive Bit/Screwdriver, 3mm Drill Bit
required in order for you to drill all screw holes before construction.
Rebecca Table is now complete.
1.
Position Leg A as shown in Fig.1a and attach to Table Top B using 4no 70mm
Screws - 2no per side (Figs.1b & 1c). ). Ensure Leg A is completely flush into
groove before fixing.
Repeat procedure for remaining Legs A.
2.
Position Leg Brace C 350mm (nom.) from base of Legs B and attach using 4no.
70mm Screws
– 2no. per Leg A (Fig.2). Repeat procedure for remaining Leg
Brace C.
3.
Position Central Brace D as shown in Fig.3a and attach to Leg Braces C using
2no 70mm Screws
– 1no per Leg Brace C (Fig.3b).
1b
1a
1c
3a
2
3b
