www.zest4leisure.co.uk | 01352 752555 option 1 | [email protected]
Requires 2 person assembly
Tools required: Corded/Cordless Drill, Pozi-drive Bit/Screwdriver,
4mm Hex (Allen) Key, Mallet. 3mm Drill Bit required in order for you to drill
1. Insert Back Assembly A between rear legs of Seat Assembly B, align bolt holes and insert 2no Hex Bolts
and ‘T’ Nuts. See Figs. 1a, 1b & 1c.
Do not fully tighten at this stage.
2. Locate Back Assembly C as shown in Fig 2a and fix in position using 6no Screws. See Figs 2b & 2c.
3. Position Armrest/Leg Assembly D1 as shown in Fig.3a. Align bolt holes and insert 2no Hex Bolts
and ‘T’ Nuts. See Fig. 3b. Do not fully tighten.
Attach Armrest/Leg Assembly D1 to Back Support Assembly A using 1no Screw. See Fig.3c.
Repeat procedure for Armrest/Leg Assembly D2.
Fully tighten all bolts at this stage.
Lily Relax Seat is now complete.