Zest 4 Leisure Abbey Table, Инструкция по сборке

Страница: 3 / 4

Please take a few moments to check all pack contents listed.
Assembly requires 2 persons.
Tools required: Corded/Cordless Drill, Pozi-drive Bit/Screwdriver, 3mm Drill Bit
required in order for you to drill all screw holes before construction.
Abbey Table is now complete.
1. Attach Horizontal Bracing A to 2no Legs B using 2no 70mm Screws per Leg
ensuring screws avoid bolt holes (Fig.1).
Repeat process for remaining Horizontal Bracing and Legs.
2. Interlock Diagonal Bracings C and fix using 1no 50mm Screw (Fig.2).
3. Attach Diagonal Bracing Assembly to legs using 1no 70mm Screw per Leg and at
a height of 350mm (nominal) (Fig.3).
4. Locate Table Top D to Leg Assembly as shown in Fig.4a.
Align bolt holes and insert 2no bolts per Leg (Fig.4b), attach nuts and washers to
bolts and fully tighten (Fig.4c).
Attach Horizontal Bracing A to Table Top D using 1no Screw per Bracing (Fig.4d)