Please take a few moments to check all pack contents listed.
Please contact “Zest4Leisure” directly if any of the pack contents are damaged
or missing. Contact telephone: 01352 752555 option 1 or email:
Assembly requires 2 persons. All screw holes to be pre-drilled.
Tools required: 10mm Spanner, Corded/Cordless Drill, Pozi-drive
Bit/Screwdriver, 3mm Drill Bit, Tape Measure.
Abbey 3 Seater Bench is now complete.
1.
Position Leg Assembly B1 onto Armrest A ensuring correct orientation of
components (Fig.1). Attach using 2no 70mm Coach Screws & Washers. Repeat
procedure for remaining Leg Assembly B2 and Armrest A.
2.
Place Seat Assembly C onto Leg Assembly B1 and attach using 2no 70mm
Coach Screws & Washers (Fig.2). Repeat procedure to attach Leg Assembly B2.
3.
Place partly assembled seat in upright position and attach Back Assembly D to
Seat Assembly C using 4no 70mm Coach Screws & Washers (Fig.3a).
Attach Back Assembly D to Armrests A using 2no 90mm Coach Screws
– 1no
per Armrest (Fig.3b)
4.
Position Fascia E as shown in Fig.4 and attach using 4no 50mm Screws.
5.
Invert chair assembly and place on a flat surface. Position 2no Diagonal Bracings
to rear of chair and fix into position using 4no 50mm Screws (Fig.5a).
Position and fix remaining 2no Diagonal Bracings as shown in Fig.5b & 5c using
4no 50mm Screws.
