www.zest4leisure.co.uk | 01352 752555 option 1 | [email protected]
Please take a few moments to check all pack contents listed
Requires 2 person assembly
Tools required: Corded / Cordless Drill, (Torx Bit Included)
1. Position Back Assembly A to Side Assembly B1 ensuring pre-drilled holes are aligned and fix through top
hole using 1no 140mm screw. (See Fig. 1a)
Similiarly position and fix Side Assembly B2 to opposite end of Back Assembly A using 1no 140mm
screw.
(See
Fig.
1b)
Further fix Side Assembly B2 in remaining pre-drilled hole using 1no 140mm screw. (See Fig. 1c)
Similarly fix Side Assembly B1 in remaining pre-drilled hole using 1no 140mm screw. (See Fig. 1d)
2. Position Front Bar C between Leg Assemblies and fix using 2no 140mm screws (1no per end). (See Fig.
2)
3. Position Seat Assembly D as shown in Fig. 3.
1a
1c
2
1b
1d
3
