ZEROXCLUB Instructions Manual
7
•
Some states or local governments may have regulations or laws that
restrict the use of anything that might impair the clear view of a license
plate. Check local laws for compliance.
•
This backup camera fits a standard license plate hole for US. If you
choose not to mount it on your license plate, locate a good place to
mount the camera. Make sure that the camera
’
s field of vision is free of
obstructions (bumpers, hitches, etc.).The camera should be positioned as
close to the center of the vehicle as possible.
•
Do not allow water to enter the LCD Display
Installation of the Monitor
Place the locking screw and suction cup on the back of the monitor
and adjust the monitor to the desired viewing angle. Then tighten
the locking screw to secure the monitor.
Clean the area on the windshield or dashboard where the suction
cup base is to be mounted. Press the suction cup base against the
windshield or dashboard and move the locking lever towards the
suction cup base.
Plug the monitor into the cigarette lighter to power for the display.
Installation of Smart Button
Adhere the 3MTM adhesive tape to the back of the Smart
Button. Peel off the backing of the tape from the Smart Button
and adhere to any flat surface that is within easy reach.