ZEROXCLUB INSTRUCTIONS MANUAL
11
the screen.
）
*
If you lose signal reception, re-pair the camera. (The screen shows "NO
SINGAL".)
*
Please confirm the monitor and camera have installed the antennas.
*
Please make sure that the camera view you need to be paired with has
been turned on via the Menu > CAM-SETUP.
*
Keep the camera and monitor closer when pairing them (within 3 feet).
(1) If you want to add one more camera, you need to press the
AV
button
to switch to the CAM 1/2/3/4 for single screen, then pair the camera with
the monitor by repeating the pairing steps, one camera at a time.
(2) First power the monitor, then power the camera, which needs pairing.
(3) Please make sure that you only power this camera and disconnect
other cameras to avoid having the signal affected by others. Only one
camera is paired at a time.
(4) Repeat the steps again if they are unsuccessful.The pairing must be
completed within 20 seconds, otherwise, you need to retry pairing steps
(5) If this fails, please observe that the monitor and camera are powered
(cover the infrared sensor to create the low light condition, then the
infrared lights on each side of the camera will turn on).
4.3 PICTURE Operation
You can adjust the BRIGHTNESS/ CONTRAST/HUE slider to the
desired level.
Press
MENU
→
Go into
PICTURE
→
Press
MODE
→
Press
+
/
-
to select to
adjust the BRIGHTNESS/CONTRAST/HUE
→
Press
MODE
→
Press
+
/
-
to adjust the value
