Zerotech Vengeance 1-6X24, Инструкция по эксплуатации

Страница: 14 / 24

14
ZEROTECH - INSTRUCTION MANUAL
VG1624-IR_V1_int. 10/2021
RESETTING THE TURRETS AFTER ZEROING
Once you have obtained a zero on your rifle/
scope, you can remove the windage and
elevation turrets using a 2mm hex key.
1.
Unscrew and remove the elevation turret
centre bolt.
2.
Slide the elevation turret completely away
from the scope body and re position,
ensuring that the ‘0’ index mark on the
turret lines up with the vertical index mark
on the main tube.
3. Re-fit and tighten the turret centre bolt
and double check the turret is in the ‘0’
position.
4.
Repeat this process for the windage turret.
Use a 2mm hex key
to remove the turret
centre bolt
Re-fit the turret and
ensure the ‘0’ is
indexed with the
vertical index mark
on the main tube