8
Controls of Remote
Install / Remove Batteries of Remote
Remove the battery compartment cover on the back of your remote
by carefully sliding to
open. The battery cover can then be lifted away. Fit the correct batteries (not included),
referring to the polarity markings. Finally, replace the cover.
NOTES:
Batteries shall not be exposed to excessive
heat such as placing under the sunlight or
near a fire.
Please make sure the batteries are installed
with their correct polarities.
Do not mix old and new batteries.
Use only the same type of batteries.
Do not dispose of the batteries in fire, battery
may explode or leak.
Do not recharge a non-rechargeable battery.
