ZEUS-200S/150 ZO-OM-007
REV : 08 13 ZERONE
①
During sterilization, don
’
t increase temperature and pressure more than the standard,
which can cause damage to the accessories.
②
Don
’
t sterilize disposable accessories.
5. Configuration
5.1
Feature
①
A DISPLAY window allows you to easily check output values, indicated as digits.
②
One equipment provides such functions that are required to perform an operation
as Functional Cutting (Pure Cut, Blend1, Blend2), Coagulation (Spray Coagulation,
Contact Coagulation), Bipolar Coagulation.
③
Auto Mode function
- Without separate selection of Cut and Coagulation button, it is available the Cut and
Coagulation only with Twin Button Handle and Double Foot Switch.
- Switch over display between set Cut and Coagulation output value.
④
Freely switch of Auto Mode/Manual selection.
⑤
Automatic selection of input power frequency 50Hz / 60HZ
⑥
Holding the button for each mode for more than 3 seconds, the output ratio on
Display will be changed to 1W to be facilitated to shift from the low to high output.
⑦
Equipped with large
FND, good visualization from long distance. A display window
Allows You to easily check output values, indicated as digits.
⑧
Foot Switch is available for Cutting and Coagulating.
⑨
Bipolar coagulation of by Foot Switch.
⑩
Microprocessor can straighten, stabilize the output.
⑪
Operations of Cutting, Coagulation and Bipolar Coagulation can be distinct from
each other by sound and indication lamp.
⑫
Each application mode (Cutting, Coagulation, Bipolar Coagulation) has a different
sound, which enables you to easily distinguish an operation type.
Check the followings before using this product.
Warning
