5
DistancePro Device Overview
Press either button to power on. The device will
display a prompt (
IMG 5.1
) to make sure Bluetooth
is activated on your smartphone (see page 3 for
details regarding pairing your DistancePro with your
smartphone).
The DistancePro attaches to the glove via a bolt
through the tee-holder loop. To place the device
on a new glove, remove the bolt (
IMG 5.2
) either by
hand or by using a 2.5 mm allen key, if necessary.
The DistancePro device is compatible with Zero
Friction magnetic ball marker gloves, including
men’s synthetic, women’s synthetic, and Johnny
Miller Motion-Fit
TM
gloves.
To replace the battery, use a coin to turn the battery
compartment door (
IMG 5.3
) counterclockwise until
the arrows align, then remove it. Take the old battery
out and insert the new battery, making sure that the
positive side (
+
) is facing OUT (
IMG 5.4
). Use ONLY
the following coin cell batteries: CR2025, 2025,
ECR2025, DL2025, BR2025, 280-205, 5003LC, or
SB-T14. To reinstall the battery compartment door,
align the arrow on the door with the arrow on the
case, then use a coin to turn the door clockwise and
lock it in place.
To power the DistancePro device off, close the app
on the phone. The DistancePro will display an “out
of range” message (
IMG 5.5
). This message includes
an option to power off. Simply selct the left button
to power off. The DistancePro also has an auto-off
feature that will power the device off after 8 hours
(or after 60 minutes if Bluetooth is not paired after
powering the device on).
Powering ON
Changing Gloves
Replacing the Battery
Powering OFF
IMG 5.1
IMG 5.5
IMG 5.2
IMG 5.3
IMG 5.4