This option puts the dimmer into ChilliNet mode so that it can be controlled remotely by other ChilliNet devices on the
network, such as Chilli wall control panels, other ChilliNet Dimmers, and other legacy ChilliNet devices, all via ChilliNet
messages.
For the network to function correctly each dimmer on the network must have a unique dimmer number.
Select the Chilli Net option from the top level options menu, and press the ENT key. The screen shows:
State: Disabled
Dimmer No: xxx
The cursor is in the State field. Use the cursor keys to select Enabled. Press the ENT key to move the cursor to the
Dimmer No field:
State: Enabled
Dimmer No: xxx
Enter the dimmer number using the numeric keypad or cursor keys. Press the ENT key to confirm.
The dimmer number is checked against other dimmers on the network. The screen shows:
Verifying
Dimmer No
If the dimmer number is valid, the screen will briefly show:
Dimmer No
Accepted
If the dimmer number is already used on the network, the screen will briefly show:
Zero 88 - Spice - Page 41 of 47
Printed: 10/03/2021 09:32:33 ES
