To control over iCANnet, connect to the iCANnet network using the
SCMR1232 iCANnet Network terminals. If this SCMR1232 is the last
device on the iCANnet, terminate the iCANnet with the termination
switch. If the SCMR1232 is not the end of the iCANnet, whether that
be the iCANnet continuing to another device, or to the other
SCMR1232 in RigSwitch 24, continue the iCANnet feed out of these
terminals, and do not terminate.
Maximum segment distance: 500m (1640 ft)
Devices per segment: 100 (without bridge or repeater)
Consult iLight for information on alternative cable types. Connecting a
mains potential cable to the iCAN Network terminals will damage the
unit and other devices connected, and invalidate warranty.
For programming and configuration of SCMR1232 on iCANnet, Device Editor V2.11.1 is required. (Packaged with
iCANsoft V3.1.7 or later).
Mixing Control Methods
Zero 88 - RigSwitch - Page 12 of 16
Printed: 12/03/2021 11:03:15 ES
