17
7.0 SETTING UP THE SMARTPHONE HOLDER
1.
Pull out the smartphone holder, it will click in place when it has been
completely pulled out. This can be found on the top of the remote control
between the two antennas.
2.
Tilt the smartphone holder towards you about 30° to click in place. Note the
holder will only tilt towards you if it has been fully extended.
3.
Tilt the support board towards you. This will sit against the body of the
remote control. (See Pic 3 below for reference).
4.
Pull up the top of the smartphone holder to adjust it in accordance to the
size of your phone. You can now place your smartphone into the holder and
it will securely clamp and hold your phone in place.
8.0 DOWNLOADING THE APP TO YOUR SMARTPHONE
8.1 WHERE TO DOWNLOAD
For iPhones
- go to the Apple App Store and search
for the Zero X Evolved 4K App.
For Android phones
- go to the Google Play Store
and search for the Zero X Evolved 4K app.
OR scan the QR code to download the App.
The Zero-X Evolved 4K App requires iOS 11.0 and above on iPhone or
Android 7.0 device to run.
8.2 ZERO-X APP
The Drone has a built in WIFI connection which us used
to wirelessly connect your smartphone to your Drone.
This allows you to view the Drone camera live view,
trigger recording, control and fly your Drone.
To connect your smartphone to the Drone please
follow the instructions below.
Go to the Google Play store if you are using an Android Smartphone, or
the Apple Store if you are using an iPhone and search for the App named
“ZXP-EVD4K or Zero-X Evolved 4K”, once located please download and
install the App.
Connect the App, then go into the WIFI settings on your smartphone
and select the connection named ZXMP-D1000_XXXX (XXXX will be your
unique Drone number). Once connected, open the ZXP-EVD4K App on
your smartphone.
