The voltage is not in the normal
range.
Switch off power and restart
when power is normal
The compressor runs but
inner liner does not get cold
The refrigerant has leaked.
Contact your local dealer.
The system is blocked.
The inner liner is very cold
and the compressor runs
continuously.
The ice layer on the evaporator is
too thick.
Defrost.
The door is being opened and
closed too frequently.
The door should be opened
as little as possible.
The freezer is overloaded.
Remove some product.
The condenser is not well-
ventilated.
The controller is faulty
Select a well-ventilated
place.
The temperature-sense is faulty.
Contact the local dealer.
The ambient temperature is too
high and the thermostat is set too
low.
The thermostat should be set
higher use as a Freezer.
The compressor does not run.
“+” and “-” are switched.
Rectify.
The controller is faulty (the power
indicator is not on).
Contact your local dealer.
The thermostat is set too high; the
ambient temperature is too low.
Use as a freezer.
The freezer is noisy.
The freezer is not level.
Make the freezer level.
Some parts come loose.
Contact your local dealer
The pipes are touching.
Contact your local dealer.
Temperature controller
displays “OC”
Sensor damaged.
Contact your local dealer
The thermostat is faulty.
Temperature controller
displays “SC ”
Sensor damaged.
Contact your local dealer
The thermostat is faulty.
Main technical parameter
Model
Z40AC/DC
Efficient volume:
40 L
Input power:
70W
Temperature
range:
10~-22℃
Dimension (L x D
x Hmm):
625x460x520
Safety:
◇
A separate earthed 15A socket outlet should be used on 230V AC and at least a 120W DC socket on
12V or 24V DC.
◇
Voltage range: 100volts -240volts
◇
If AC voltage has been unstable, wait three minutes before restarting.
◇
when both AC and DC are connected, the freezer will run on AC power.
◇
Allow approximately 3
～
5 minutes for start up on 12Vwhen AC power is disconnected.
◇
In the event of any malfunction of your freezer, please contact the nearest service agent.
◇
The appliance may be connected to more than one source of energy (AC or DC).
Caution:
