Power supply
Level Plus desks can either be powered from an
External Power supply or from the Power Supply from
a Dimmer. One Zero 88 Beta pack supplies enough
power for a Level 24 Plus. Power supplied from a
dimmer via the Analogue connection will also power
the DMX output. Power from an External Power
Supply will power the Analogue and DMX Outputs.
Options Available:
External Power Supply UK
Stock No 00-104-11
External Power Supply Schuko
Stock No 00-104-21
Level Plus DMX Output Kit
Stock No 00-616-00
Analogue Output:
0 to +10V via 8 pin ring locking DIN (6 channels per
DIN connector)
Short circuit proof.
All channels capable of 5mA,
Diode output.
Pins 1 to 6 = channels 1 to 6
Pin 7 = Power in, +20 Volts @ 200mA
Pin 8 = 0V signal ground
External Power Supply Unit:
Separate plug mounted transformer with 4 pin locking
DIN connector
Mains voltage 230V -18% to +10% (190V - 253V)
External PSU Connector:
Pin 1 =
+9V DC (Unused on Level Plus desks)
Pin 2 =
0V
Pin 3 =
+20V DC @ 200mA (used to power desk)
Pin 4 =
not used
DMX Output:
5 pin XLR, not isolated, with voltage protection.
Pin 1 = 0V Signal ground
Pin 2 = 1- DMX drive compliment
Pin 3 = 1+ DMX drive true
Pin 4 & 5 = Not connected
PAGE 4
7371200P4/v1
Technical Specification
External Power Supply Connector.
Viewed from the rear of the desk.
Analogue connector
Viewed from the rear of the desk
DMX connector
Viewed from the rear of the desk
