Zero 88 FLX Series, Руководство пользователя

Страница: 65 / 233

For example on FLX, the following three commands would record three slightly different groups, despite all containing
the same fixtures:
1 Thru 4, Record Group 1
4 Thru 1, Record Group 2
2 Thru 4, And 1, Record Group 3
Using groups via touch
Using the built-in touch screen, you can select and deselect groups directly just by touching them.
Touching multiple groups will select all of those groups. ZerOS will keep adding to the selection until another
command is entered (like changing the intensity or selecting a palette). After that, those channels will remain selected
until you press on another group, which will start the selection again. On FLX, the previous channels being deselected
can be avoided by typing And first, and then selecting another group(s).
Intensity Groups can be recalled by double-tapping a group on the touch screen. This also selects the fixtures within
that group. If all fixtures are already at the Intensity Group levels, double-tapping the group will turn the intensities off
(0%).
Single Select and Multi-Select
On FLX and FLX S48, there are two Group Selection modes available - “Single Select” and “Multiple Select”,
selectable via the buttons along the top of the Groups window when viewed on the external monitor.
In Single Select, only one group can be selected at a time. Selecting a group will deselect any other channels, unless
syntax commands are used. And and Except keys are shown on the touchscreen for convenience and work
identically to their equivalent front panel keys on FLX.
When Multiple Select is active, touching multiple groups will act as described above, under “Using groups via touch”.
The Clear Selection button is highlighted blue when there are channels selected. Pressing it will deselect them all.
Using groups via syntax
Zero 88 - ZerOS - Page 65 of 233 Printed: 23/11/2020 12:50:03 JH