Insert the PVC wall plugs into the holes on the
wall.
Step 5
Align the screw holes of the Remote holder to
the holes on the wall. Use the screws provided
to mount the holder on the wall.
Slot the Remote into the holder.
Step 6
Step 7
Refer to the Zernet User Manual to pair the installed Remote to your Zernet Controller.
Rev 1.4 www.zernet.com
Copyright © Zernet Ltd 2019. All rights reserved.
Zernet
®
is a registered trademark of Zernet Ltd. All other trademarks
are the property of their respective owners. The information in this
document is subject to change without notice. Zernet assumes no
responsibility for any errors that may appear in this document.
For warranty information please go to www.zernet.com/warranty
CIDF19000180
