music:
This mode is dedicated for listening to any type of music as
a “normal” speaker.
movie:
This mode is dedicated if you stream a movie, sound is
differently mixed for movies and zeppy will create a vir-
tual 3D sound if sound comes from a movie source file.
This mode also works nice with live music recordings or
streaming of a live music video.
sound cloud - Near field sound optimization:
With this profile you can listen in low volume to music, hear a
rich bass and you will not disturb others near you. This profile
was created that you can even lay your head, or neck against
the membrane.
massage:
This mode is developed for an audio massage experience, by
zeppy´s membrane facing towards a pillow and you place
your neck or upper shoulder area against the housing.
voice:
This mode provides clear sound to content of voice. It is de-
signed to listen to audio books, pod casts or learn languages.
low energy:
This mode is designed, that zeppy can play as long as
possible. Attention is not given to sound performance but
to achieve longest play time.
1
1
2
3
4
5
6
2
3
4
5
6
6 different sound files by Bongiovi acoustics
zeppy
is equipped with a state of the art real time audio
processing DPS® system by Bongiovi acoustics. We
highly recommend you to set any EQ on your music source
to bypass or Flat. Other settings might disturb the real
time audio processing and will result in strange or even
bad sound and distortion.
zeppy
is fully charged if all 3 LED
lights (zep) are steady on.
PRESS to select sound mode
LED Lights
Pick my tune
Bluetooth
>
70%
<
70%
<
30%
Pick my Tune function:
APP FREE and NFC FREE pairing of multiple speakers. You
can pair up to
7 zeppys
with an already Bluetooth connected
“Master”
zeppy
. (in Total
8 zeppy´s
playing same content)
How it works:
Just turn on another
zeppy
and place it with facing mem-
brane to membrane congruent to an ALREADY connected
“Master”
zeppy
until you will hear a double low beep sound.
Now the RED LED behind “y” will flash on the new slave
zeppy
. It will flash approx. 5 seconds then will turn into
steady Red LED and music is starting to be played. Note
the Blue light will be OFF! Outdoor you will now be able to
walk approx. 50m away from the Master
zeppy
. You can ad-
just your own volume and you can select your own desired
sound profile on the “slave”
zeppy
. Indoor you can listen
to music in another room, depending on wall construction.
AUTO DIM LED
zeppy
is equipped with automatic diming of the LED lights,
to save energy and to keep a dark room dark, e.g. using
zeppy
in a bedroom. After approx. 30 to 40 seconds the
LED lights will all dim off…a short press on the sound pro-
file button will reactivate the LED light without any further
function.
Use zeppy in water:
zeppy
is designed to be used on water,
zeppy
is floating on
water and the flat membrane is not creating distortion if it
gets wet.
zeppy
is able to transmit soundwaves into water
through its entire housing. You are taking a bath in a bath-
tub and will be able to listen to your favorite tunes without
any sound distortion and in addition you will feel the sound
waves on your body.
CAUTION:
Make sure the USB protection lid is 100% closed. After using
zeppy
in water, always open the protection Lid, make sure
no water is trapped inside the USB port before you charge
zeppy
. Dry up with a cloth if necessary before charging!
After using
zeppy
in pool water or salt water ALWAYS IM-
MEDIATELY rinse
zeppy
with fresh water and dry it up with
a cloth. ALWAYS make sure NO pool water or salt water is
trapped inside the USB port! This can create corrosion to
the connector.
Charging zeppy:
zeppy
can be charged in powered on or powered off mode,
which means you can use zeppy when you charge it.
In order to watch battery life we recommend you to char-
ge
zeppy
in power off mode.
zeppy
is charged by 5V at
max 1,5A. An empty
zeppy
is fully charged in approx. 4 to 5
hours. After 90 min to 100 min of charging zeppy will have
reached approx. 60% to 70% of its fully capacity when using
a charger which supplies at least 1A.
zeppy
is fully charged if all 3 LED lights are steady on…no
flashing anymore, or if LED lights have been turned off if
zeppy
was charged in power off mode. Each LED repre-
sents approx. 30% of capacity level.
more
Charge
Pair
zeppy
with up to 7 friends
with our
Pick my Tune function
0,20 Inch
3
2
1
4
5
6
7
8
Do not try to open housing, risk of unrepairable damage,
risk of demage of battery and explosion Do not dispose with
household trash! Must be disposed at designated center’s
for electronic garbage.
Technical Data:
Bluetooth Modul 4.2 2,4GHz
Pick My Tune: 5,8 GHz digital audio Transceiver
Digital AMP 2 x 5 W
Bongiovi DPS® real time audio processing
Dual driver Stereo Flat Membran 2 x 4 Ohm
Battery Type 3,8V 4400mAh LiPoly
Battery charging time 5 hours / 5V 1,5A
Play Time approx. 6 to 12 hours depending on music type
and volume
Dimensions: 258 x 122 x 46 mm (L x W x H)
Weight: 440g speaker, 48g loop
DPS Digital Power Station® is a trademark by Bongiovi
acoustics LLC Florida and used under licence.
Bluetooth® word and symbol are trademarks of Bluetooth
SIG Inc and are used under license.
zeppy®
word and logo is a trademark of Gopro creative
Marketing GmbH, Austria
This product is to comply with the limits for a Class B digital
device according Part 15 of FCC rules
Designed in Austria www.zeppy.com
assembled in Germany
Output Power Limiter:
zeppy
is equipped with a volume output limiter to avoid
male function when battery is drained. With decreasing bat-
tery level,
zeppy
will reduce the maximum output power
automatically…most hearable if only ONE green LED of the
battery level indicator is lighting up, or starts flashing. ( -2
dB, -3dB, -6 dB are the output level limiter settings linked up
with the LED indicator .
SPECIAL CAUTION:
Even
zeppy
is built in a super light weight but robust design
please pay attention to the following:
Keep
zeppy
away from sharp objects which can destroy the
sealing of the housing ( e.g.knives, needles, screws).
Do not push
zeppy
under water below 1M for more than
3 min IPX7. Do not expose
zeppy
to fire or any other hot
places. Risk of explosion. Avoid using
zeppy
under direct
sunlight in a hot environment. Avoid dropping
zeppy
, which
might create inner damage to electronics and battery.
Scratches and dents might occur on the surface of the
membrane. This is normal and will not affect the sound per-
formance and sealing as long no penetration of material
happened.
Working temperature conditions -5 C° up to °40C
Storage temperature conditions 0 C° up to 30 C°
Never charge
zeppy
if USB port is wet and or there is evi-
dence of water leakage and damage.
Never store
zeppy
in discharged condition, if you tend not
to use it for some periode of time! Store best with 2/3 char-
ged and recharge every 3 to 4 months.
