Zephyr ZPO-E30AS, Руководство по установке

Страница: 18 / 46

Maintenance
• It is recommended to operate the appliance prior to cooking. It is recommended
to leave the appliance in operation for 5 minutes after cooking is completed in
order to completely eliminate cooking vapors and odors. The proper function
of the range hood is conditioned by the regularity of maintenance.
• The decorative mesh filters capture the grease particles suspended in the
air and are therefore subject to clogging because of frequent use. In order to
prevent a fire hazard, it is recommended to clean the filter a minimum of every
2 months or when instructed by the Metal Filter Clean indicator on the range
hood controls. Clean the range hood by carrying out the following instructions:
- Remove the filters from the range hood and wash them in a solution of water
and neutral liquid detergent, leaving to soak.
- Rinse thoroughly with warm water and leave to dry.
- Filters may also be washed in the dishwasher at the lowest setting.
The filters may alter in color after several washes but is not cause for replacement.
• Clean the blower and other surfaces of the range hood regularly using a cloth
moistened with denatured alcohol or non abrasive liquid detergent.
AIRFLOW CONTROL TECHNOLOGY
Airflow Control Technology (ACT™) enables the installer to reduce the maximum
blower CFM to one of two most specified CFM levels; 390 or 290 CFM. The us-
age of ACT may not be necessary for your installation. Please check your local
codes for CFM restrictions.
Setting ACT 390
With the hood off, press buttons E and F simultaneously for approximately 3
seconds. The buttons will flash for 2 seconds to confirm the setting change. The
hood will have 3 fan speeds in ACT 390.
Setting ACT 290
With the hood off, press buttons B and F simultaneously for approximately 3
seconds. The buttons will flash for 2 seconds to confirm the setting change. The
hood will have 2 fan speeds in ACT 290.
Take care when reducing the CFM. After the ACT feature is set, it cannot be
reverted to the default CFM.
- 1 8 -