Zephyr Twister AK8000BS, Инструкция по использованию, уходу и установке

Страница: 14 / 44

12
www.zephyronline.com
SURFACE MAINTENANCE:
Do not use corrosive detergents, abrasive detergents or oven cleaners.
Do not use any product containing chlorine bleach or any product containing chloride.
Do not use steel wool or abrasive scrubbing pads which will scratch and damage surface.
Cleaning Stainless Steel
Clean periodically with warm soapy water and clean cotton cloth or micro fiber cloth. Always rub in the direction of the
stainless steel grain. To remove heavier grease build up use a liquid degreaser detergent.
After cleaning use a non-abrasive stainless steel polish/cleaners, to polish and buff out the stainless luster and grain.
Always scrub lightly, with clean cotton cloth or micro fiber cloth and buff in the direction of the stainless steel grain.
Cleaning Filters
The aluminum mesh filters installed by the factory are intended to filter out residue and grease from cooking. They need
not be replaced on a regular basis but are required to be kept clean.
Remove and clean by hand or in dishwasher using a non-phosphate detergent. Discoloration of the filter may occur
if using phosphate detergents, or as a result of local water conditions - but this will not affect filter performance. This
discoloration is not covered by the warranty. Spray degreasing detergent and leave to soak if heavily soiled.
Dry filter and re-install before using hood.
Installing Filter, FIG 5:
1. Place back of filter into channel on left side of Power Pack.
2. Push filter handle in towards left side of Power Pack.
3. Pivot filter up and lock into place.
Hood Model: Part No. Qty. to Order
AK8000BS 50200022 1
AK8000AS-ES 50200022 1
AK8100AS-BF 50210030 1
3
FIG 5
FIG 6
2
1
1
2
3
Maintenance –
Cleaning and Installing Filters