Zephyr Tornado II, Инструкция по использованию, уходу и установке

Страница: 16 / 60

16 Tornado II & Tornado III Use, Care, and Installation Guide
TO R N A D O I I &
TO R N A D O I I I
I N S E R T
P R O
Installation Instructions
Remote Blower Preparation
1. Place 10” round adapter on top of
Power Pack and secure it with (4)
M4x8 screws. Connect 10” round
ductwork to 10” round adapter.
2. Install threaded end of remote
blower wiring through external
blower wiring knock out locked
in junction box on top of power
pack.
3. Place cap over threaded end of
remote blower wiring and secure
by turning clockwise. Connect 6
pin male connector from blower
wiring to 6 pin female connector
in the power pack.
4. Secure green ground wire from
remote blower wiring to ground
screw located inside the power
pack.
CBE-1000 / PBN-1000A: WIRING DIAGRAM
White (common)
Black (high)
Blue (med)
Red (low)
Green (ground)
Remote Blower
Wiring Box
(hood)
Junction Box
(Remote Blower)
NOTE:
For instructions on installing remote blowers, please refer to the CBE-1000 or PBN-1000A
manuals included in the blower packaging and on our website: www.zephyronline.com