Zephyr Presrv PRW24C32CG, Инструкция по использованию, уходу и установке

Страница: 19 / 56

19 PRW24C32CG Use, Care, and Installation Guide
ZEPHYRONLINE.COM
If the unit is unplugged, power lost, or turned off, you must wait 3 to 5 minutes before restarting the
unit. If you attempt to restart before this time delay, the appliance may not start and will not keep the
last set temperature.
Using the Control Panel
This wine cooler has a temperature range from 38ºF-65ºF.
F
C
R
left zone right zone
Power Button
Press and hold this button for three seconds to power your unit on or off. While the unit is on,
the R “Compressor Running” light may illuminate to indicate the internal compressor is active.
Increase Temperature
Press this button to increase the temperature by one (1) degree increments. 65ºF is the highest
available temperature on this unit.
Decrease Temperature
Press this button to decrease the temperature by one (1) degree increments. 38ºF is the lowest
available temperature on this unit.
Interior Light
Press this button to cycle through the different colors and brightness for the control panel and
internal lights. There are three colors and two brightness settings: Cloud White (50%, 100%),
Deep Blue (50%, 100%) and Amber (50%, 100%).
ºF/ºC Selector
Hold the Increase and Decrease Temperature buttons at the same time for two seconds to
switch the display temperature. Performing this on either zone works.
NOTE: The wine cooler is equipped with a temperature memory function. If power is suddenly lost,
the previous set temperature and light setting will be saved, and the cooler will return to this
setting once power is restored.
Operating Your Appliance