Zephyr Ion, Руководство пользователя

Страница: 28 / 31

First steps
1. Check first that your Ion is plugged in and turned on.
2. There will be a red screen and red light when your Ion is plugged in and off.
3. If your Ion is plugged in and the lights are not on, make sure the outlet is
working by testing with another appliance e.g. cell phone charger.
Ion will not heat up
•
Set your Ion to lowest temperature, which is 100°F, then switch from
Fahrenheit to Celsius then switch back to Fahrenheit. This process will reset
the electronics for the heating element.
•
To switch between F and C press both temperature control buttons at the
same time.
Pump will not run
•
Unplug the Ion, wait ten seconds, and plug the device back in.
Pump runs but will not fill bag
•
Confirm that the basket and the basket cover washer (the silicon washer that
fits into the lid/basket cover) are in place and seated correctly.
•
Confirm bag valve system is firmly seated on the nozzle base.
•
Confirm bag is not obstructing airflow into the valve.
Basket Cover Washer will not stay in place
•
Clear area of any left over aromatic plant material
•
Remove washer, press the outside edges of the mesh screen firmly into the
center groove on the inside of the white nozzle/straw making certain to let the
screen crease along the edge of the inside groove.
•
Insert washer lip side facing the mesh screen, making certain the washer is
seated snug and flat.
•
If the above does not work, take the washer and the screen out. Clear any
debris. Replace the washer first, then bend the screen into a dome shape and
fit it into the washer with the point of the dome facing away from the lid and
the sides pressed against the inside of the washer to hold it in.