Zephir ZFL34M, Инструкция по эксплуатации

Страница: 34 / 38

Problem Possible Cause Solution
Fail to operate
Power is off or fuse is blown Turn power on check fuse
Bad wire connection
Turn power off, loose canopy, or check
all connections
Inconsistent location for dip switch
Set the dip switch to be the same of
transmitter and receiver
Battery power is off Use a new battery
Cannot control speed or light
Bad wire connection
Turn power off and check the receiver
wiring is correct
Light is off Check the bulb is not burnt
CARE AND CLEANING
Attention: before normal cleaning operations, turn the fan off, turn the fan lamp off (if present), and
disconnect from mains power by turning off the isolating switch (pos. 0/OFF).
•
For cleaning, use a soft, slightly damp cloth; do not use abrasive orcorrosive products. Be careful
not to damage the equipment, blades, electrical connections, or impair the hardware.
•
Do not immerse or soak any part of the fan in water or any other liquid; in the event that this
happens, first ensure the fan is disconnected from the mains power supply, and then wipe the
appliance off carefully, making sure that all electrical parts are perfectly dry: in case of doubt,
consult a qualified professional technician.
•
It is important to keep the air vents of the motor free of dust and lint.