ZEOS PANTERA, Руководство пользователя

Страница: 36 / 77

36
SCSI BIOS Enable Menu
The SCSI default configuration settings are appropriate for
most system installations. Configuration changes are only
necessary when using nonstandard (older) SCSI devices or
nonstandard peripheral expansion cards.
SCSI BIOS Enabled
Enables or disables the integrated SCSI BIOS.
Controller Address
The on-board SCSI controller always uses IRQ11, non-DMA.
If other attached devices are using IRQ11, change their settings
to a different IRQ. The SCSI I/O port default address is 340h
(primary). The alternate address is 140h, but is not supported
by the system BIOS at this time.
Synchronous
This parameter selects whether synchronous data transfer with
SCSI targets should be initiated. When disabled, the system will
still respond to negotiations initiated by SCSI targets. This
option is generally used when an older SCSI device is installed
which doesn’t recognize synchronous negotiation. The default
is enabled.
Note: Some SCSI devices like CD-ROM drives may require this parameter
to be disabled.
Chapter 3 - Using SETUP