zeonzu LT-N100, Быстрый старт, Страница: 4 / 16

2 Nebulization
1) To turn on, press the power button. The nebulizer will perform an automatic
cleaning mode with short pauses and a green indicator light will flash for
about 5 seconds. This is to prevent blockages in the nebulizer before the
start of the process.
2) After the cleaning mode is complete, the nebulizer will start normal
operation with the green indicator light always on under the lowest pressure
rate setting as the default.
3) To switch between pressure rate levels, press the button. The mode
indicator will show the corresponding color for each level:
green for low, blue for mid, and cyan for high.
4) The nebulizer will automatically shut down after 10 minutes of use.
If you need to continue using it, you will need to restart it.
5) If the battery is low, the alarm indicator will flash in blue. If there is no liquid
in the nebulizer, the alarm indicator will flash in yellow.
Note:
1. After turning on the nebulizer, normal operation will start after a delay of 10
seconds due to self cleaning process. If you press the button within those
10 seconds, the machine will turn off directly.
2. The rate adjustment can only be made from low to high once. After switching
to the high-rate level with Cayan color, pressing the button will power off the
system. If you need to go back to a lower rate level, you will need to restart
the nebulizer.
Medication cup
Nebulizing plate
Power /
Pressure Rate
adjustment
Mode indicator
Alarm indicator
ENGLISH