Zenty ZT-116, Руководство пользователя

Страница: 18 / 27

(844) 200-1945 | sales@zenty.com Page 18 of 27 Copyright © Zenty AV
Please refer to the " Command list" for details.
Example: Output5 switch to input 6 channel off:
Operation format: #video_d out5 matrix=6 onoff=0
1). Connect the Ethernet port of matrix to the Ethernet port on PC by a crossover cable with RJ45
connectors.
2). Configure your PC as follows:
①
Click Start > Control Panel > Network and Sharing Center.
②
Click Change Adapter Settings.
③
Highlight the network adapter you want to use to connect to the device and click Change settings
of this connection.
3). The local Area commotion properties window for Network selection appears as below:
4). Click the Highlight Internet Protocol Version 4 (TCP/IPv4).
5). Click Properties.
6). Select Use the following IP Address for static IP addressing and fill in the details.
For TCP/IPv4 you can use any IP address in the range 192.168.1.1 to 192.168.1.255 (excluding
192.168.1.168).
7). Click OK.
8). Click Close.
Default IP Address: 192.168.1.168;
MASK: 255.255.255.0;
Gateway:192.168.1.1;
MAC:0008-DCCA-CF3F
（
Each device has a different MAC address)