Diagnos�c Trouble Codes
E01 Overuse Protection Mode Allow system rest for 13 minutes
to prevent overheating.
E02 Overuse Protection Mode System is overheating. Allow
system rest for 25 minutes
before resuming useage.
E03/ Overload Protection Mode
E04
Reduce load applied should it
be above the recommended
value. Reset the system after
adjusment by holding the
“▼” button for 10 seconds.
E05 Motor 01 Protection Mode
E06 Motor 02 Protection Mode
Motor might be jammed.
Check and try resetting the
system after adjusment by
holding the “▼” button for
10 seconds.
E07 Motor 01 Single HALL
Malfunction
E08 Motor 02 Single HALL
Malfunction
Poor connection between
Motors and Control Box.
Check and try resetting the
system after adjusment by
holding the “▼” button.
E09 Imbalanced Desktop
Warning
Check for serious imbalance.
Reset system after adjusment
by holding the “▼” button.
E30 6 Axles Motion Sensor
Malfunction
Major malfunction. Please
contact manufacturer.
_OL Severe Overload
Protection Mode
Reduce load applied should it
be above the recommended
value. Reset the system after
adjusment by holding the
“▼” button for 10 seconds.
E20/ Motor Double HALL
E21 Malfunction
E22/ Motor 01 Power Supply
E23 and HALL Malfunction
Poor connection between
Motors and Control Box.
Check and try resetting the
system after adjusment by
holding the “▼” button
錯誤診斷碼一覽
E01
過度使用保護模式
暫停使用系統
13
分鐘，避免發生
過熱情況
.
E02
過度使用保護模式
系統過熱， 暫停使用系統
25
分
鐘讓系統冷卻
.
E03/
負重超載保護模式
E04
減少負重到建議數值， 按著
“▼”
10
秒鐘重置系統
.
E05
摩打 01 保護模式
E06
摩打 02 保護模式
摩打可能受阻.
檢查及調整後長按
“▼” 10
秒鐘
重置系統.
E07
摩打 01 單 HALL 故障
E08
摩打 02 單 HALL 故障
摩打與控制盒信號出現問題.檢查
及調整後長按
“▼” 10
秒鐘重置
系統.
E09
桌面不平衡警告
檢查及調整負載不平衡情況.然
後長按
“▼” 10
秒鐘重置系統.
E30
6 軸動態感應故障
嚴重錯誤，請聯繫 本公司
.
_OL
負重嚴重超載保護模式
減少負重到建議數值. 長按
“▼”
10
秒鐘重置系統
.
E20/
摩打 雙 HALL 故障
E21
E22/
摩打 01 供電及HALL 故障
E23
摩打與控制盒信號出現問題.檢查
及調整後長按
“▼” 10
秒鐘重置
系統.
3
4
