GB-6
PSZ2610
IMPORTANT
Remove any obstacle before beginning
work.
4. Inspect the entire unit for loose fasteners
and fuel leakage. Make sure that the cut-
ting attachment is properly installed and
securely fastened.
5. Always use the shoulder strap. Adjust
the strap for comfort before starting
the engine. The strap should be ad-
justed so the left hand can comfort-
ably hold the handlebar grip approxi-
mately waist high.
STARTING THE ENGINE
1. Keep bystanders and animals at least
15 m away from the operating point. If
you are approached, immediately stop
the engine.
2. The product is equipped with a cen-
trifugal clutch mechanism, so the cut-
ting attachment begins to rotate as
soon as the engine is started by put-
ting the throttle into the start position.
When starting the engine, place the
product onto the ground in a flat clear
area and hold it firmly in place so as
to ensure that neither the cutting part
nor the throttle come into contact with
any obstacle when the engine starts.
WARNING
Never place the throttle into the high-
speed position when starting the engine.
3. After starting the engine, check to
make sure that the cutting attachment
stops rotating when the throttle is
moved fully back to its original posi-
tion. If it continues to rotate even after
the throttle has been moved fully back,
turn off the engine and take the unit to
your authorized ZENOAH servicing
dealer for repair.
USING THE PRODUCT
IMPORTANT
Cut only materials recommended by the
manufacturer. And use only for tasks ex-
plained in the manual.
1. Grip the handles firmly with both hands
using your whole hand. Place your feet
slightly apart (slightly further apart than
the width of your shoulders) so that your
weight is distributed evenly across both
legs, and always be sure to maintain a
steady, even posture while working.
2. Maintain the speed of the engine at
the level required to perform cutting
work, and never raise the speed of the
engine above the level necessary.
3. Never operate the pruner at an angle
greater than 60° in order to reduce the
risk of being struck by falling objects
during operation.
4. If the unit starts to shake or vibrate,
turn off the engine and check the
whole unit. Do not use it until the
trouble has been properly corrected.
5. Keep all parts of your body away from
rotating cutting attachment and hot
surfaces.
6. Never touch the muffler, spark plug,
or other metallic parts of the engine
while the engine is in operation or im-
mediately after shutting down the en-
gine. Doing so could result in serious
burns or electrical shock.
WARNING
Approaching or contacting electric power
lines with pruning saw may cause serious
injury death from electrocution. Electric-
ity can jump from one point to another by
means arcing or may be conducted
through damp branches. Maintain a clear-
ance of at least 15m between pruning saw
and any electrical line carrying live current.
•
IF SOMEONE COMES
1. Guard against hazardous situations at
all times. Warn adults to keep pets and
children away from the area. Be care-
ful if you are approached. Injury may
result from flying debris.
2. If someone calls out or otherwise in-
terrupts you while working, always be
sure to turn off the engine before turn-
ing around.
MAINTENANCE
1. In order to maintain your product in
proper working order, perform the
maintenance and checking operations
described in the manual at regular in-
tervals.
2. Always be sure to turn off the engine
before performing any maintenance or
checking procedures.
WARNING
The metallic parts reach high temperatures
immediately after stopping the engine.
3. When replacing the cutting attachment
or any other part, or when replacing
the oil or any lubricant, always be sure
to
use only ZENOAH products or prod-
ucts which have been certified by
ZENOAH for use with the ZENOAH
product.
4. In the event that any part must be re-
placed or any maintenance or repair
work not described in this manual
must be performed, please contact a
representative from the store nearest
ZENOAH authorized servicing dealer
for assistance.
5. Do not use any accessory or attachment
other than those bearing the ZENOAH
mark and recommended for the unit.
6. Under no circumstances should you
ever take apart the product or alter it
in any way. Doing so might result in
the product becoming damaged dur-
ing operation or the product becom-
ing unable to operate properly.
5. For safe operation
