manualshive.com logo in svg

Zenoah NS2522, Руководство пользователя, Страница: 11 / 16

Поделиться
Скачать
Zenoah NS2522 Скачать руководство пользователя страница 11

NS2522

GB-11

G

B

1. Press the primer at the bottom of the carburetor a few

times with your finger until the fuel starts to flow through
the transparent pipe.

 NOTE

• There is no need to operate the primer when restart-

ing immediately after stopping the engine, provided
there is fuel left in the fuel tank.

2. Lift the choke lever on the right of the air cleaner until

it is in the "closed" position, then open the throttle le-
ver on the main unit side about 1/3-1/2 from the "slow"
position.

 NOTE

• When restarting immediately after stopping the en-

gine, set the choke lever to "open" and the throttle
lever to "slow".

9. Operation

 WARNING

• Highly combustible. When refueling, switch the en-

gine off and keep well away from naked flames.

• After filling the tank with fuel, firmly tighten the

cap.

a

b

■

Starting engine

 WARNING

• Before starting the engine, make sure that the spray

lever (spray valve) is completely returned. Starting with
the spray lever still pulled out is dangerous, as chemi-
cal fluid may spray out of the nozzle as soon as the
engine is started.

• To start the engine, place the sprayer on an even and

stable surface or platform. If the sprayer is unstable,
the reaction on starting etc. may cause it to fall.

 IMPORTANT

• Do not allow the chemical fluid or water in the tank to

run out while the engine is running. If the engine runs
empty it may cause breakage of the spray pump.

8. Chemical filling

 WARNING

• Chemical substances should be handled correctly,

observing the precautions marked on the container.
Some chemicals are extremely hazardous to humans
and animals, and handling errors can cause serious
poisoning or even fatal accidents.

• When not in use, chemical substance containers

should be stored separately from other containers out
of the reach of children.

 IMPORTANT

• Do not fill the chemical tank with undiluted fluid. This

could cause the gasket and valves to lose their dura-
bility.

■

Procedure for filling

1. Use a bucket or other suitable container and dilute

the chemical to the requisite strength.

2. Place the sprayer on an even and stable surface and

remove the chemical tank cap.

3. Fill the tank by passing chemical through the strainer.
4. When filling is complete, firmly tighten the cap.

a. strainer

Chemical tank capacity: 25 litres

a. cap
b. fuel tank

a. air cleaner
b. choke lever
c. close
d. open
e. transparent pipe
f. primer

g. throttle lever
h. fast
i. slow

Содержание NS2522

















Отзывы:

Нет отзывов