manualshive.com logo in svg

Zenoah LRTZ2600, Руководство пользователя

Поделиться
Скачать
Zenoah LRTZ2600 Скачать руководство пользователя страница 13

GB-13

G

B

LRTZ2600

 WARNING

Make sure that the engine has stopped and is cool
before performing any service to the machine. Con-
tact with moving cutting head or hot muffler may re-
sult in a personal injury.

AIR FILTER

• The air filter, if clogged, will reduce the engine perfor-

mance. Check and clean the filter element in warm,
soapy water as required. Dry completely before in-
stalling. If the element is broken or shrunk, replace
with a new one.

FUEL FILTER

• When the engine runs short of fuel supply, check the

fuel cap and the fuel filter for blockage.s

SPARK PLUG

• Starting failure and mis-firing are often caused by a

fouled spark plug. Clean the spark plug and check
that the plug gap is in the correct range. For a re-
placement plug, use the correct type specified by

ZENOAH.

 

• REPLACEMENT PLUG IS A NGK CMR7A.

9. Maintenance

9. Maintenance

Fuel filter

Air Filter

TIGHTENING TORQUE:

87 ~ 104 in-lbs
(9.8 ~ 11.8 N.m.)

0.6 - 0.7 mm

 IMPORTANT

• Note that using any spark plug other than those des-

ignated may result in the engine failing to operate
properly or in the engine becoming overheated and
damaged.

• To install the spark plug, first turn the plug until it is

finger tight, then tighten it a quarter turn more with a
socket wrench.

MUFFLER

 WARNING

• Inspect periodically, the muffler for loose fasten-

ers, any damage or corrosion. If any sign of ex-
haust leakage is found, stop using the machine
and have it repaired immediately.

• Note that failing to do so may result in the engine

catching on fire.

SPARK ARRESTER

• The muffler is equipped with a spark arrester to pre-

vent red hot carbon from flying out of the exhaust out-
let. Periodically inspect and clean as necessary with
a wire brush.

Spark arrester

Содержание LRTZ2600
















Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды