background image

GB-14

HB2302 / HBZ2602

AIR INTAKE SCREEN (AIR INLET NET)

 IMPORTANT

• Blowing air is taken in from the air inlet net. When air

flow has dropped down during operation, stop the
engine and inspect the air inlet net for blocking by
obstacles.

• Note that failure to remove any such obstacles may

result in the engine becoming overheated and dam-
aged.

 WARNING

• Never use the blower without the net of the blower.

Before each use, check that the net is attached in
place and is free from any damage.

9. Maintenance

10. Storage

BEFORE STORING THE BLOWER:

1. Drain a fuel tank and push the primer bulb until it be-

comes empty of fuel.

2. Remove the spark plug and drop a spoonful of 2-cycle

oil into the cylider. Crank the engine several times and
install the spark plug.

3. Store unit in a dry, dust free place, out of the reach of

children.

(1)Screw
(2)Air intake screen
    (Air inlet net)

11. Disposal

• When you dispose of the machine, do not disassemble

the machine.

• When disposing your machine, fuel or oil for the ma-

chine, be sure to allow your local regulations.

12. Optional vacuum
kit usage

See the operating instructions included with the vacuum
kit.

Содержание HBZ2602
















Отзывы: