background image

G3300 / G3300EZ

GB-16

Limited warranty

Should any failure occur on the product under normal
operating conditions within the applicable warranty pe-
riod, the failed part will be replaced or repaired free of
charge by a KOMATSU ZENOAH authorized dealer.

WARRANTY PERIOD:

 1 year (6 months if used profes-

sionally, and 30 days if used for rental purpose) from
the date of initial purchase.

THE PURCHASER SHALL BEAR COSTS OF TRANS-
PORTING THE UNIT TO AND FROM THE KOMATSU
ZENOAH DEALER.

THE PURCHASER SHALL NOT BE CHARGED FOR DI-
AGNOSTIC LABOR WHICH LEADS TO THE DETERMI-
NATION THAT A WARRANTED PART IS DEFECTIVE, IF
THE DIAGNOSTIC WORK IS PERFORMED AT THE
KOMATSU ZENOAH DEALER.

THE PURCHASER OR OWNER IS RESPONSIBLE FOR
THE PERFORMANCE OF THE REQUIRED MAINTE-
NANCE AS DEFINED BY THE MANUFACTURER IN THE
OWNER/OPERATOR MANUAL.

ANY WARRANTED PART WHICH IS NOT SCHEDULED
FOR REPLACEMENT AS REQUIRED MAINTENANCE,
OR WHICH IS SCHEDULED ONLY FOR REGULAR IN-
SPECTION TO THE EFFECT OF REPAIR OR “REPLACE
AS NECESSARY” SHALL BE WARRANTED FOR THE
WARRANTY PERIOD. ANY WARRANTED PART WHICH
IS SCHEDULED FOR REPLACEMENT AS REQUIRED
MAINTENANCE SHALL BE WARRANTED FOR THE
PERIOD OF TIME UP TO THE FIRST SCHEDULED
REPLACEMNET POINT FOR THE PART.

ANY REPLACEMENT PART THAT IS EQUIVALENT IN
PERFORMANCE AND DULABILITY MAY BE USED IN
NON-WARRANTY MAINTENANCE OR REPAIRS, AND

SHALL NOT REDUCE THE WARRANTY OBLIGATION
OF THE COMPANY.

THE COMPANY IS LIABLE FOR DAMAGES TO OTHER
ENGINE COMPONENTS CAUSED BY THE FAIRURE OF
A WARRANTED PARTS STILL UNDER WARRANTY.

THE WARRANTY DOES NOT APPLY TO

 THOSE UNITS

WHICH HAVE BEEN DAMAGED BY NEGLIGENCE OF
INSTRUCTION LISTED IN THE OWNER/OPERATOR
MANUAL FOR PROPER USE AND MAINTENANCE OF
THE UNITS ACCIDENT MISHANDLING, ALTERATION,
ABUSE, IMPROPER LUBULICATION, USE OF ANY
PARTS OR ACCESSARIES OTHER THAN THOSE
SPECIFIED BY THE COMPANY, OR OTHER CAUSES
BEYOND THE CONPANY'S CONTROL.

THIS WARRANTY DOES NOT COVER

 THOSE PARTS

REPLACED BY NORMAL WEAR OR HARMLESS
CHANGES IN THEIR APPEARANCE.

THERE ARE NO OTHER EXPRESS WARRANTIES.

IMPLIED WARRANTIES

 INCLUDING THOSE OF MER-

CHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE 

ARE LIMITED

 TO TWO (2) YEARS OF HOME

USE [ONE (1) YEAR FOR ANY OTHER USE] FROM THE
ORIGINAL DELIVERY DATE.

LIABILITIES FOR INCIDENTAL OR CONSEQUENTIAL
DAMAGE UNDER ANY AND ALL WARRANTIES ARE
EXCLUDED.

IF YOU NEED TO OBTAIN MORE INFORMATION,
PLEASE CALL YOUR NEAREST SERVICE CENTER, OR
CHECK PLEASE KOMATSU ZENOAH WEB SITE http://
www.zenoah.net

10. Specifications

Power unit:

Displacement (cm

3

): ............................................. 31.8

Fuel: ................ Mixture (Gasoline 50 : Two-cycle oil 1)
Fuel tank capacity (cm

3

): ....................................... 270

Chain oil: ................................. Motor oil SAE# 10W-30
Oil tank capacity (cm

3

): .......................................... 200

Carburetor: ..................... Diaphragm type (Walbro WT)
lgnition system: ..................................... Pointless (TCl)
Spark plug: ...................................... Champion RCJ-7Y
Oil feeding system: ............................ Automatic pump
Power ........................................ 1.35/10,000 (kw/min

-1

)

Max speed ............................................. 12,500 (min

-1

)

Idle speed ................................................ 2,900 (min

-1

)

Sprocket (Teeth x Pitch): ................................ 6T x 3/8

Dimensions (L x W x H) (mm): ................ 380x230x250

Dry weight
Power unit only (kg):
     G3300: ............................................................... 3.4
     G3300EZ: ........................................................... 3.5

Cutting head:

Guide bar
     Type: ................................................ Sprocket nose
     Size (in. (mm)): ........................................... 14 (350)
Saw chain
     Type: ................................................. Oregon 91VG
     Pitch (in. (mm)): ........................................ 3/8 (9.53)
     Gauge (in. (mm)): ................................... 0.05 (1.27)

Specifications are subject to change wihout notice.

Содержание G3300

















Отзывы: