20
2. ASSEMBLING ROTOR / IGNITION MODULE (Fig.5)
1) Insert the 0.5mm plate in between the rotor magnet
metal and the coil iron core.
2) Tighten bolts (M5x2) while pressing the ignition
module toward rotor.
3) Remove the 0.5mm plate and confirm that the air gap
is 0.5~0.6mm by thickness gage.
3. REMOVING PISTON PIN (Fig.6)
1) Remove snap rings from both sides of the piston pin.
2) Push the piston pin by socket.
Service Guide
Bolt (M5)
Ignition
Module
Rotor
Plate
Fig.5
Piston
Pin
Socket
Fig.6
Содержание G320PUM
Страница 2: ...2...
Страница 24: ...24 Parts List G320PUM 967289101...
Страница 28: ...Head Office 1 9 Minamidai Kawagoe city Saitama 350 1165 Japan Phone 81 49 243 1115 Fax 81 49 243 7197...
