background image

13. Limited warranty

Should any failure occur on the product under
normal operating conditions within the applicable
warranty period, the failed part will be replaced or
repaired free of charge by a ZENOAH authorized
dealer.

WARRANTY PERIOD: 1 year (6 months if used
professionally, and 30 days if used for rental
purpose) from the date of initial purchase.

THE PURCHASER SHALL BEAR COSTS OF
TRANSPORTING THE UNIT TO AND FROM
THE ZENOAH DEALER. 

THE PURCHASER SHALL NOT BE CHARGED
FOR DIAGNOSTIC LABOR WHICH LEADS TO
THE DETERMINATION THAT A WARRANTED
PART IS DEFECTIVE, IF THE DIAGNOSTIC
WORK IS PERFORMED AT THE ZENOAH
DEALER.

THE PURCHASER OR OWNER IS
RESPONSIBLE FOR THE PERFORMANCE OF
THE REQUIRED MAINTENANCE AS DEFINED
BY THE MANUFACTURER IN THE
OWNER/OPERATOR MANUAL.

ANY WARRANTED PART WHICH IS NOT
SCHEDULED FOR REPLACEMENT AS
REQUIRED MAINTENANCE, OR WHICH IS
SCHEDULED ONLY FOR REGULAR
INSPECTION TO THE EFFECT OF REPAIR OR
“REPLACE AS NECESSARY” SHALL BE
WARRANTED FOR THE WARRANTY PERIOD.
ANY WARRANTED PART WHICH IS
SCHEDULED FOR REPLACEMENT AS
REQUIRED MAINTENANCE SHALL BE
WARRANTED FOR THE PERIOD OF TIME UP
TO THE FIRST SCHEDULED REPLACEMENT
POINT FOR THE PART.

ANY REPLACEMENT PART THAT IS
EQUIVALENT IN PERFORMANCE AND
DURABILITY MAY BE USED IN NON-
WARRANTY MAINTENANCE OR REPAIRS,
AND SHALL NOT REDUCE THE WARRANTY
OBLIGATION OF THE COMPANY.

THE COMPANY IS LIABLE FOR DAMAGES TO
OTHER ENGINE COMPONENTS CAUSED BY
THE FAIRURE OF A WARRANTED PART STILL
UNDER WARRANTY.

THE WARRANTY DOES NOT APPLY TO
THOSE UNITS WHICH HAVE BEEN DAMAGED
BY NEGLIGENCE OF INSTRUCTION LISTED IN
THE OWNER/OPERATOR MANUAL FOR
PROPER USE AND MAINTENANCE OF THE
UNITS ACCIDENT MISHANDLING,
ALTERATION, ABUSE, IMPROPER
LUBRICATION, USE OF ANY PARTS OR
ACCESSORIES OTHER THAN THOSE
SPECIFIED BY THE COMPANY, OR OTHER
CAUSES BEYOND THE COMPANY'S
CONTROL.

THIS WARRANTY DOES NOT COVER THOSE
PARTS REPLACED BY NORMAL WEAR OR
HARMLESS CHANGES IN THEIR
APPEARANCE.

THERE ARE NO OTHER EXPRESS
WARRANTIES.

IMPLIED WARRANTIES INCLUDING THOSE
OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE ARE LIMITED TO
TWO (2) YEARS OF HOME USE [ONE (1) YEAR
FOR ANY OTHER USE] FROM THE ORIGINAL
DELIVERY DATE.

LIABILITIES FOR INCIDENTAL OR
CONSEQUENTIAL DAMAGE UNDER ANY AND
ALL WARRANTIES ARE EXCLUDED.

IF YOU NEED TO OBTAIN MORE
INFORMATION, PLEASE CALL YOUR
NEAREST SERVICE CENTER, OR CHECK
PLEASE ZENOAH WEB SITE
http://www.zenoah.net

23

Содержание BT251

























Отзывы: