Zenoah BC4350FW Скачать руководство пользователя страница 2

1. Warning labels on the machine

(1) Read owner’s manual before operating this machine.
(2) Wear head, eye and ear protection.
(3) Wear foot protection.
(4) Wear gloves.
(5) Beware of thrown objects.
(6) Warning / Attention
(7) Keep all children, bystanders and helpers 15 meters away from the machine.

If warning label peels off or becomes soiled and impossible to read, you should contact the dealer
from which you purchased the product to order new labels and affix them in the required location(s).

Never modify your machine.
We won’t warrant the machine, if you use the remodeled brushcutter or if you don’t observe
the proper usage written in the manual. 

WARNING

IMPORTANT

15m (50ft)

(1)             (2)             (3)             (4)           (5)               (6)                                      (7) 

2

SAFETY FIRST

Instructions contained in warnings within this manual
marked with a 

symbol concern critical points which

must be taken into consideration to prevent possible serious
bodily injury, and for this reason you are requested to read
all such instructions carefully and follow them without fail.

■ 

NOTES ON TYPES OF WARNINGS IN THE MANUAL

This mark indicates instructions which must be followed in
order to prevent accidents which could lead to serious
bodily injury or death.

This mark indicates instructions which must be followed, or it
leads to mechanical failure, breakdown, or damage.

This mark indicates hints or directions useful in the use of the
product.

NOTE

IMPORTANT

WARNING

Contents

1. Warning labels on the machine ………2
2. Symbols on the machine ………………3
3. Specifications ……………………………3
4. Safety precautions ………………………4
5. Set up ……………………………………8
6. Fuel ………………………………………9
7. Operation ………………………………10
8. Maintenance ……………………………12
9. Trouble shooting ………………………14

10 Disposal…………………………………14

Содержание BC4350FW
















Отзывы: