Zennox D3941, Руководство пользователя, Страница: 17 / 28

17
Figure 12: Silence Finder
4. Your recording will then be analyzed, and a Label Track will appear underneath your recording. It will contain markers
representing the beginning of each new song. (Figure 13). When you export your recording (see: Exporting Your
Tracks To Separate Files), these markers will be used to create separate audio files for each song on your album.
5. If you notice that the markers placed by the Silence Finder do not match up with the songs correctly, or that there
were too few or too many markers added, you may undo the operation and try again with different settings. If your
markers appear to be correct, proceed to the Exporting Your Tracks To Separate Files Section below.
6. To undo, select the Edit menu from the top of the screen and choose Undo.
7. Repeat steps 1-3 above, and try a different setting in the Silence Level field. If there were too few markers added
in your previous attempt, use a lower number in the Silence Level Field , such as 10 . If there were too many
markers added in your previous attempt, try a higher number in the Silence Level Field , such as 20 . Certain
records and types of music may not work well automatic track separation. If you cannot get good results with the
Silence Finder you may need to manually divide your album into tracks.
Manually Dividing Your Album:
1. Press the Skip to Start button to move to the beginning of the recording
Figure 13: Track Labels
2. Select the Project menu and then
select Add Label At Selection . This
will set the starting point of the first
track.
3. Type in the name of the first track,
the text will show at the label
marker. (See 14)